Type: Driver
File Name: pololu_stepper_36354.zip
File Size: 17.9 MB
131 (3.55)
Downloads: 85
Supported systems: ALL Windows 32x/64x
Price: Free* (*Free Registration Required)

Download Now

Stepper Motor Applications Stepper motors are generally used in a variety of applications where precise position control is desirable and the cost or complexity of pololu stepper feedback control system is unwarranted. Status: Active and Preferred.

Pololu - DRV Stepper Motor Driver Carrier, High Current

Bipolar stepper motor wiring diagram. Products New Products Specials! Brand: Pololu.

Status: Discontinued. Since the input voltage to the driver can be significantly higher than the coil voltage, the measured current on the power supply can be quite a bit lower than the coil current the driver and coil basically act like a switching pololu stepper power supply.

Also, if the supply voltage is very high compared to what the motor needs to achieve the set current, the duty cycle will be very low, which also leads to significant differences between average pololu stepper RMS currents. Additionally, please note that the coil current is a function of the set current limit, but it does not necessarily equal the pololu stepper limit setting.

The actual current through each coil changes with each microstep. Brand: SOYO. Add to cart Add to wish list.

  • Pololu - DRV Stepper Motor Driver Carrier, High Current
  • Related categories

Shop Blog Forum Support. The motor can be controlled by a pololu stepper of suitable H-bridges one for each coilbut we recommend using a bipolar stepper motor driver. It has a pinout and interface that are nearly identical to those of our A carriersso it can be used as a pololu stepper replacement for those boards in many applications. Log In.

Shop Blog Forum Support. Feedback Comments or questions? Products New Products Specials! Also, note that you will need to perform this adjustment again if you ever change pololu stepper logic voltage, Vdd, since the reference voltage that sets the current limit is a function of Vdd. Note: The coil current can be very different from the power supply current, so you should not use the current measured at the power supply to set the current limit.

Stepper Motor: Bipolar, 200 Steps/Rev, 20×30mm, 3.9V, 0.6 A/Phase

The appropriate place to put your current meter is in series with one of your stepper motor coils. Four, six, and eight-wire pololu stepper motors can be driven by the DRV if they are properly connected; a FAQ answer explains the proper wirings in pololu stepper.

Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. More generally, rewiring anything while it is powered is asking for trouble. Stepper motors typically have pololu stepper step size specification pololu stepper.

Products New Products Specials! This board ships with 0.

Several pololu stepper are available for this product. Alternatives available with variations in these parameter s : header pins soldered? It offers a holding torque of 2.

Stepper Motors

This hybrid stepping motor has a 1. Shop Blog Forum Support.Stepper motor drivers are specifically designed to drive stepper motors, which are capable of continuous rotation with precise position control, even without pololu stepper feedback system. Our stepper motor drivers offer pololu stepper current control and multiple step resolutions, and they.

Stepper motors allow for precise position control without the need for a feedback system and are capable of pololu stepper rotation, unlike standard hobby servos.

Related Posts